玻璃廠超浪費每天產出大量垃圾!他一氣之下把垃圾DIY成「超夢幻玻璃碎片檯燈」!

他把別人當作垃圾的東西,變成超夢幻逸品!Jackman是一位很厲害的工匠,擁有一間位於吹製玻璃工廠旁的工作室。沒想到有天他靈機一動,把人家不要的玻璃殘骸做成意想不到的美麗檯燈。現在,就讓我們來看看整個製造過程吧!   首先,把用來作檯燈底座的木材鋸好。 廣告1  

February 12, 2017
選擇語言:

他把別人當作垃圾的東西,變成超夢幻逸品!Jackman是一位很厲害的工匠,擁有一間位於吹製玻璃工廠旁的工作室。沒想到有天他靈機一動,把人家不要的玻璃殘骸做成意想不到的美麗檯燈。現在,就讓我們來看看整個製造過程吧!

 

首先,把用來作檯燈底座的木材鋸好。

First, our builder cut down an old sawhorse he had previously built to serve as the base for the lamps.
廣告1

 

為了呈現堆疊的效果,他把木板黏合起來。

Wanting to achieve a stacked plywood look, he glued each cut of wood together.

 

當所有木板都黏好之後,他緊緊地夾緊它們,以膠水密封並確保它們可以快速地乾燥。

With everything glued into place, he clamped them tightly to help seal up the glue and ensure a speedy drying time.
廣告2

 

接著,它把木材裁成檯燈底座的尺寸,並用磨砂機磨平它。

After cutting each lamp base down to size, he smoothed them out with a sander.
廣告3

 

為了裝下金屬罐,他在每塊木板上弄了一個圓形的空間。

To accommodate the mason jars, he cut a circular space in each base where the jars would sit.

 

他也加了一些接線孔。

He also added holes for the wiring.

 

以及按開關的地方!

While he was at it, he added a hole for the toggle switch as well.

 

當所有洞洞的都裁好之後,他決定加一些潤滑油。

With all the holes cut out, he decided the bases could use a bit of finish.

 

為了防止金屬罐移動,他加上了蓋環。

To prevent the mason jars from moving, he glued the lid rings into place.

 

為了讓光線通過檯燈,他在罐蓋內切了一個洞。

To help the light pass through the lamp, he cut a hole inside the jar lid.

 

然後,他為電線弄了一條通道。

He then made a channel for the wire out of an acrylic tube.

 

把管子放好之後,他開始把色彩繽紛的碎片倒進罐裡。

With the tube in place, he began filling the jars with the colorful shards.

 

弄好後把蓋子蓋上。

After that, he reattached the lids.

 

接著,就是發電的零件。

Next up was the electrical component.
廣告4

 

他先使用工作燈裝置,但發現燈泡變得太熱了。

He initially decided on a worklight system but found that the lamp was becoming way too warm.

 

所以決定換成LED燈帶。

To solve the problem, he went back to the drawing board and decided that an LED strip would be a better solution.

 

幸運地,這個新的照明系統不用太多的調整,所以剩下來的任務,就是使用鋁板隱藏照明零件。

Thankfully, the new lighting system didn't involve much tweaking to his previous design, so all that was left was to hide the lighting mechanism using a sheet of aluminum.

 

玻璃碎片檯燈就這樣完成了!

And then there was light!
廣告

 

近看是不是更浪漫了?

Who wouldn't want a pair of these epic lamps in every room of the house?

 

這個DIY真的太神了!小編也好想擁有一個!

 

讓我們來看看影片吧!

訂閱我們的Youtube,定時收到最有趣的影片!
 

來源:Viralnova

接著看貼心男友親手DIY「自動愛情盒」送女友,打開機關「全部活起來」最美愛情展開!

TEEPR 亮新聞著作權聲明:非法抄襲TEEPR 亮新聞網站請注意,本站所有內容皆由自家TEEPR 亮新聞 編輯撰寫,並非如非法內容農場複製貼上。本網站之文字敘述、圖片、影像視聽及其他資訊等,非經授權,不得轉載。如侵權將立刻請臉書封鎖專頁。微改標題、圖片、前段,仍然抓得到!
分類:藝術, 世界, 小物
加入粉絲團! 玻璃廠超浪費每天產出大量垃圾!他一氣之下把垃圾DIY成「超夢幻玻璃碎片檯燈」!留言按此 好友人數分享! 好友人數加入好友
廣告
廣告